Download document () of 20
Send email
Download
You have exceeded the download limit
Green Motion Home – Mobile application setup
If you would like to use a mobile application to control your Green Motion Home EV charger, we recommend Monta Charge.
The app is free and available on iOS and Android devices.
The instructions below are also applicable if you would like to connect to any other OCPP* platform.
*OCPP: Open Charge Point Protocol is the standard communication protocol for EV chargers
You can watch the video and follow the steps below.
Use the white leaflet to scan the QR code to connect automatically to the EV charger hotspot with your phone.
Once connected (look for the Wi-Fi icon in the status bar of your phone), enter the address 192.168.53.1 in your favorite browser.
You will see a warning informing you about a possible insecure connection. It is perfectly safe to proceed.
Scroll down to the backend connection section.
For Monta:
For any OCPP backend
After reboot, the LED of your charger must be green.
If your LED shows a white strip with a red dot, either the internet credentials or the OCPP are wrong. You will need to connect again to the hotspot to update the settings of the section marked as DISCONNECTED.
Please make sure to disconnect your phone from the Wi-Fi hotpost of your EV charger. You can also navigate to the network settings and forget the network.
1. Navigate to charger screen
2. Enter the charge point information
3. Fill in the details about your charger's name and location
4. Enter the charger serial number as Charge Point Identifier
5. On the OCPP URL Configuration screen, scroll down on the page and after reviewing the information. click on Yes, pair charge point
6. Your connection is successful
1. Navigate to your EV charger settings
2. Select Charging rules
3. Add a new rule allowing to automatically charge
